PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100
PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100

PoolTwister AquaQuip Twister Cleaner Power Steering Device #TWI-100

Manufacturer: Solar Sun Rings
Item #: TWI-100
Availability: Available
Regular price: $107.99
Sale price: $76.99
Qty:
In Stock!

Our Top Seller! We Recommend this for every suction cleaner!


Power-steering for your Pool Cleaner!


Problem:
Many suction cleaners get stuck in corners, others constantly follow a repetitive pattern around the pool. Either way, you end up with a dirty pool.


Solution:
Simply install Twister. Twister continually changes the direction of the hose, power steering your pool cleaner out of awkward corners to ensure a constantly random and thorough cleaning pattern.


How does Twister work?

Twister is powered by the constant flow of water through the pool cleaner hose. A paddle wheel spins inside the Twister and transfers drive to the pool hose, counter-rotating the hose about 3 times per hour.

This counter-rotation swivels the Angled Adapter on the pool cleaner, thus continually changing the direction of the hose. Most suction cleaners move around the pool by following the hose, therefore with Twister changing the direction of the hose, the pool cleaner will be steered out of awkward corners to ensure a constantly varied cleaning pattern.


By rotating the hose, the abrasion from the pool sides and the degradation by the sun's UV rays are now spread evenly around the hose, thus greatly reducing this damage and saving you money.

Twister Specifications

Product Weight   316 grams
Unit Box Size   190mm x 140mm x145
Unit Box Weight   530 grams
Outer Box Size
(12 units)
  435mm x 210mm x 600mm
Outer Box Weight
(12 units)
  6.6 kilograms
Australian Patent Granted   AU 2007229380
USA Patent Pending   USSN 11/975,197

Installation Instructions


  1. Switch off your pool pump and check that your baskets and filter are clean, and that your pool cleaner hoses are not leaking from splits or abrasion.
  2. Cut your pool hose with knife, 2ft (600mm) from the skimmer box. If you have an In-Line Leaf Canister, then see notes below.
  3. Submerge Twister until full of water. Fit Twister between these two cut sections of hose. Twister must be installed with the correct side facing upwards and the correct end facing the pool cleaner. Refer to the arrows and markings on the Twister to ensure correct orientation. Additional installation photos appear on the outside of the box.
  4. Top of Twister should locate no more than 20mm above water level. If adjustments are required to the skimmer box connections to keep your hose and Twister at the correct height, then contact your local pool professional or Twister dealer.
  5. Fit the Angled Adaptor between your pool cleaner and your hose. Place the pool cleaner back in the pool, fill the hose with water so that all air is removed. (For the Zodiac X7 Quattro, remove the “flexi-hose joint”, and fit the Angled Adaptor onto the swivelling tube. Do not use the leader hose.)
  6. With the Twister, hoses, angled adaptor and cleaner fitted and free of air, switch on your pool pump and watch your pool cleaner reach places it never reached before, without getting stuck in corners.
  7. Your installation is now complete.